Suin TFG6800 Series Скачать руководство пользователя страница 3

Страница: 3 / 90

TFG6800 Series Function/Arbitrary Waveform Generator Users’ Guide

Suin Instruments Co., Ltd

intercoupling.

Storage characteristic:

The instrument can store and recall several group working condition

parameters and several users’ arbitrary waveform.

Sync Output:

The instrument can output corresponding signals synchronizing on different

functions.

External Modulation:

External modulation can be used when FM, AM, PM, PWM, SUM are

modulating.

External Trigger:

External Trigger can be used in key controlling, sweep, burst, double pulse,

frequency and waveform sequence.

External Clock:

It can automatically test and use external base clock. Internal reference clock can

be output.

Counter:

8 bits/s resolution, it can test external signals’ frequency, cycle, pulse width, duty cycle.

Touch Screen:

Capacitive touch screen to make the operation more easily.

Calculation function:

Values of frequency, period, amplitude peak to peak, RMS or dBm could

be selected.

Communication interface:

USB device, USB host and LAN interfaces are supported.

TCXO (option):

±1ppm accuracy, ±1ppm/year aging rate.

Power Amplifier (option):

2 times power amplifier, Max output power 8W (8Ω).

IOT interface (option):

Base on Lora wireless LAN standard.

2. Models

This User Guide is applied to TFG68xx series function/arbitrary waveform generator.

3. Packing list

TFG68xx Function/arbitrary waveform generator 1set

Three core power cord 1 pcs

BNC two ports testing cable 1 pcs

CD 1 pcs

Antenna (option) 1 pcs

Note:

This document may include technical inaccuracy, and it is only a usage guide for the instrument. Suin

Instruments Co., Ltd. will not make any promise to this document, including but not limit to the promise for some

special sales and usage. It will not be notified if there were any modification in this documentation.

Содержание TFG6800 Series



























































































Результаты поиска

Содержание TFG6800 Series

Отзывы:

Похожие инструкции для TFG6800 Series

Бренды по названию

Популярные бренды

Suin TFG6800 Series, Руководство пользователя

Результаты поиска

Содержание TFG6800 Series

Отзывы:

Похожие инструкции для TFG6800 Series

Бренды по названию

Популярные бренды