SUHNER MACHINING ESW 150, Техническая документация

Страница: 32 / 64

The fork light barrier detects whether the suction holes
in the pad are aligned with the changer. If not, the pin is
pressed down a few millimeters, which interrupts the light
barrier.
The photoelectric sensor recognizes whether abrasive is
on the pad or not. The customer must «teach» the photo-
electric sensor.
(Operating instructions available at www.balluff.com, Or-
der code: BKT0010, Name: BKT 6K-002-P-S75).
3. h
anDling
/ o
PEration
In the following description, the OWS (Orbital Angle
Grinder) machine will be used as the tool.
3.1 A
ssemBly
The boreholes in the base plate are used for installation of
the stripper and changer. The stripper and changer can
be installed separately from each other.
3.2 O
BtAining ABrAsiVe
s
teP
1
Align the axis of the OWS over the axis of the middle stud.
s
teP
2
Drop the OWS so far that both of the external pins have
dropped significantly (by approx. 5-7 mm, if they are not
in the suction holes).
32
P
ortugúes
Español
Italiano
F
rançais
Deutsch
English