Rev.06
– 03/02/2021
Pag. 8/33
Code: 71207
8.
SAFETY INFORMATION
8.1. SIGNALING PLATE
The following label is glued on the SCOOTER, it must never be removed and in case of illegibility it must be replaced
with a new one to be requested from SUEX assistance. The removal of this label implies the non-responsibility of
SUEX s.r.l. for accidents occurring as a result of conduct held in contravention of the indications contained therein.
8.2. TRAINING
To use the SCOOTER the diver must have obtained the necessary certification from qualified agencies.
A lot of information is also available to the kind customers on the site: www.suex.it.
8.3. EQUIPMENT CONFIGURATION, TRIM AND RIDING POSITION
The SUEX SCOOTERS are of the TOW BEHIND type: ideal use requires that the diver be towed while remaining
behind the SCOOTER.
The SCOOTER should not be improperly connected to the diver.
The diver must be adequately trained to face and manage his dive safely even in the event of a SCOOTER failure.
The user must be able to leave the SCOOTER at any time and with extreme ease.
The diver must always carry a cutting device with him in the event that it is necessary to cut the tow cable that may
be used.
PROPER WAYS TO CONNECT THE DPV TO THE DIVER: HARNESS AND TOW CORD
The SCOOTER must be connected to the diver via a cable and a quick release carabiner.
Use the correct towing harness (see SUEX accessories) and the two cords provided.
Connect the carabiner to the front D-ring of the harness.
CORRECT WAY TO CONNECT THE TOW CORD TO THE SCOOTER
The tow cord must be connected to the SCOOTER on the two holes near the handle on the propeller conveyor, see
the following images.