Rev.06
– 03/02/2021
Pag. 25/33
Code: 71207
of Vaseline grease on the O-ring and put it in its place. Keep the screw of the locking knob lubricated with navy blue
grease.
28.2. MAINTENANCE CLOSING KNOB SEALS
Whenever the closing knob (9) (fig.1) should come into contact with the sand, rinse it abundantly with fresh water
before rotating it. For the replacement of the gaskets, refer to the authorized Suex centers.
28.3. PROP LOCK PROPELLER
The easy replacement prop-lock propeller has been designed to be removed from the SCOOTER in any condition
without using any tool. Should extraneous object be entangled, such as ropes, fishing lines or even in case an
alternative propeller (different for shape or number of blades) is to be used, either during the dive or on surface, the
replacement is easy and the full function of the inside safety maintained.
HOW TO REMOVE THE PROP LOCK PROPELLER
Switch off the SCOOTER and make sure it is off!
Grasp the propeller by a blade (30 - Fig. 5) and unscrew the knob (31), turning anticlockwise until the propeller is
completely extracted.
Fig.5
THE USE OF PROTECTIVE GLOVES IS ALWAYS MANDATORY
The use of the hands or other parts of the body between the propeller blades is a
potentially dangerous action, despite the existence of a safety clutch between the
propeller and the engine. In the case of replacement or removal of the prop lock
propeller, always make sure that the SCOOTER is off, or by pressing the trigger, the
propeller must not turn!
HOW TO INSERT THE PROP LOCK PROPELLER
Switch off the SCOOTER and make sure it is switched off!
Insert the motor shaft of the SCOOTER (35 - Fig.6) in the hole of the propeller (36), turn the propeller (clockwise)
until the pin (33) matches the seat (34) propeller. When you hear a click, the propeller will stop turning. Continue by
turning (CLOCKWISE) the switch (6) WITH THE FINGER ONLY, WITHOUT FORCING.
DO NOT UNSCREW OR TIGHTEN the screw (32), which has the function of adjusting
the torque of the safety clutch which has been calibrated by Suex. Modifying this torque
can cause potential DANGER as it can render the safety system ineffective.
