Subaru Impreza 2016, Руководство пользователя

Страница: 380 / 600

Black plate (388,1)
一 般
Model "A1250GE-A" EDITED: 2015/ 8/ 4
7-24
Starting and operating/Continuously variable transmission
Continuously variable trans-
mission
The continuously variable transmission is
electronically controlled and provides an
infinite number of forward speeds and 1
reverse speed. For some models, it also
has a manual mode or an
“
L
”
position.
WARNING
Do not shift from the
“
P
”
or
“
N
”
position into the
“
D
”
or
“
R
”
position
while depressing the accelerator
pedal. This may cause the vehicle
to lurch forward or backward.
CAUTION
.
Shift into the
“
P
”
or
“
R
”
position
only after the vehicle is comple-
tely stopped. Shifting while the
vehicle is moving may cause
damage to the transmission.
.
Do not race the engine for more
than 5 seconds in any position
except the
“
N
”
or
“
P
”
position
when the brake is applied or
when chocks are used in the
wheels. This may cause the
transmission fluid to overheat.
.
Never move the vehicle rearward
by inertia with the select lever set
in a forward driving position or
move the vehicle forward by
inertia with the select lever set
in the
“
R
”
position. Doing so may
result in an unexpected accident
or malfunction.
.
Do not shift from the
“
D
”
position
into the
“
R
”
position or vice
versa until the vehicle has com-
pletely stopped. Such shifting
may cause damage to the trans-
mission.
.
When parking the vehicle, first
securely apply the parking brake
and then place the select lever in
the
“
P
”
position. Do not park the
vehicle for a long time with the
select lever in any other position
as doing so could result in a
dead battery.
NOTE
.
When the engine coolant tempera-
ture is still low, the transmission will
upshift or downshift at higher engine
speeds than when the coolant tempera-
ture is sufficiently high in order to
shorten the warm-up time and improve
driveability. The gearshift timing will
automatically shift to the normal timing
after the engine has warmed up.
.
Immediately after transmission fluid
is replaced, you may feel that the
transmission operation is somewhat
unusual. This results from invalidation
of data which the on-board computer
has collected and stored in the memory
to allow the transmission to shift at the
most appropriate times for the current
condition of your vehicle. Optimized
shifting will be restored as the vehicle
continues to be driven for a while.
.
When driving a vehicle that is
equipped with CVT under continuous
heavy load conditions such as towing a
camper or climbing a long, steep hill,
the engine speed or the vehicle speed
may automatically be reduced. This is
not a malfunction. This phenomenon
results from the engine control func-
tion maintaining the cooling perfor-
mance of the vehicle. The engine and
vehicle speed will return to a normal
speed when the engine is able to
maintain the optimum cooling perfor-
mance after the heavy load decreases.
Driving under a heavy load must be
performed with extreme care. Do not
try to pass a vehicle in front when
driving on an uphill slope while towing.
.
The continuously variable transmis-
sion is a chain type system that