Subaru Impreza 2016, Руководство пользователя

Страница: 109 / 600

Black plate (111,1)
一 般
Model "A1250GE-A" EDITED: 2015/ 8/ 4
.
When the battery of the access key is
discharged, or when operating it in a
location with strong radio waves or noise
(e.g., near a radio tower, power plant,
broadcast station, large display, airport,
electrical sign board or an area where
wireless equipment is used), or while
talking on a cell phone, the operating
ranges may be reduced, or the keyless
access function may not operate.
In such a case, perform the procedure
described in
“
Locking and unlocking
” F
9-
29.
.
When an access key is in the operating
range, if the door handle becomes wet
due to exposure to a significant amount of
water when the vehicle is washed or
during heavy rain, the doors may be
locked or unlocked.
!
How to use keyless access func-
tions
!
Keyless access function tips
.
When you lock the doors and rear gate
(5-door) using the keyless access func-
tion, turn the push-button ignition switch
off. It is not possible to lock the doors and
rear gate using the keyless access func-
tion when the push-button ignition switch
is on the
“
ACC
”
or
“
ON
”
position. Refer to
“
Switching power
” F
3-7.
.
If the door handle is gripped with a
gloved hand, the door lock may not be
released.
.
When performing the locking proce-
dure too quickly, locking may not have
been completed. After locking the doors, it
is recommended to pull the REAR door
handles to confirm that the doors have
been locked.
.
It is not possible to lock the doors when
one of the doors is open. Close all of the
doors including the rear gate and lock the
doors.
.
Within 3 seconds after locking the
doors and the rear gate by using the
keyless access function, it is not possible
to unlock the doors and/or the rear gate
(5-door) by using the keyless access
function.
.
If any of the doors or the rear gate is
open, the doors and the rear gate cannot
be locked.
.
When locking, be sure to carry the
access key to prevent locking the access
key in the vehicle.
.
The setting of the hazard warning
flasher operation and the volume of the
audible signal can be changed by your
SUBARU dealer. We recommend that you
contact your SUBARU dealer for details.
.
For models with multi function display,
the setting of the hazard warning flasher
operation can be changed by operating
the multi function display. For details, refer
to
“
Hazard warning flasher setting
” F
3-88.
!
Unlocking
Carry the access key, and grip the door
handle.
Models without double locking system:
All doors and the rear gate (5-door) will be
unlocked. Also, the hazard warning
flashers will flash twice.
Models with double locking system:
.
When gripping the driver
’
s door handle:
Only the driver
’
s door will be unlocked.
.
When gripping the front passenger
’
s
door handle: All doors and the rear gate
(5-door) will be unlocked.
Also, the hazard warning flashers will flash
Keys and doors/Keyless access with push
–
button start system
2-13
–
CONTINUED
–
2