Subaru Impreza 2016, Руководство пользователя

Страница: 469 / 600

Black plate (481,1)
一 般
Model "A1250GE-A" EDITED: 2015/ 8/ 4
Access key
–
if access key
does not operate properly
CAUTION
Keep metallic objects, magnetic
sources and signal transmitters
away from between the access key
and the push-button ignition switch.
They may interfere with the commu-
nication between the access key
and the push-button ignition switch.
If the locking/unlocking procedures, power
switch procedures or engine start proce-
dures cannot be operated because of
strong radio noise in the surrounding area
or low battery of the access key, perform
the following procedure. When the battery
of the access key is discharged, replace it
with a new one. Refer to
“
Replacing
battery of access key
” F
11-61.
&
Locking and unlocking
1) Release button
2) Mechanical key
While pressing the release button of the
access key, take out the mechanical key.
Lock or unlock the driver
’
s door with the
mechanical key in the procedure de-
scribed in
“
Locking and unlocking from
the outside with key
” F
2-4.
NOTE
After locking or unlocking, be sure to
attach the mechanical key back to the
access key.
&
Switching power
1. Apply the parking brake.
2. Shift the shift lever in neutral (MT
models) or the select lever in the
“
P
”
position (CVT models).
3. Depress the clutch pedal (MT models)
or brake pedal (CVT models).
4. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound, and the opera-
tion indicator on the push-button ignition
switch illuminates in green. At the same
time, the status of the push-button ignition
switch changes to either of the following.
.
When the keyless access with push-
In case of emergency/Access key
–
if access key does not operate properly
9-29
–
CONTINUED
–
9