Subaru Impreza 2016, Руководство пользователя

Страница: 137 / 600

Black plate (141,1)
一 般
Model "A1250GE-A" EDITED: 2015/ 8/ 4
occurs, or not to issue a warning when
any malfunction occurs.
–
On the instrument panel
–
On the floor
–
Inside the glove box
–
Inside the door trim pocket
–
On the rear seat
–
Inside the trunk (4-door)
–
In the cargo area (5-door)
.
When operating the push-button
ignition switch or starting the engine,
if the battery of the access key is
discharged, perform the procedure
described in
“
Access key
–
if access
key does not operate properly
” F
9-29.
In such a case, replace the battery
immediately. Refer to
“
Replacing bat-
tery of access key
” F
11-61.
&
Switch location
Left-hand drive models
Right-hand drive models
1) Operation indicator
2) Push-button ignition switch
&
Switching power
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key, and sit in the
driver
’
s seat.
2. Shift the shift lever in neutral (MT
models) or the select lever in the
“
P
”
position (CVT models).
3. Press the push-button ignition switch
without depressing the clutch pedal (MT
models) or the brake pedal (CVT models).
Every time the button is pressed, the
power is switched in the sequence of
“
OFF
”
,
“
ACC
”
,
“
ON
”
and
“
OFF
”
. The
operation indicator on the push-button
ignition switch illuminates or turns off as
shown in the following chart.
Power
status
Indicator color Operation
OFF Turned off Power is turned off.
ACC Orange
The following parts
can be used:
wipers, washer,
audio and acces-
sory power outlet.
ON
Orange
(while engine is
stopped)
All electrical parts
can be used.
Turned off
(while engine is
running)
Instruments and controls/Push
–
button ignition switch (models with push
–
button start system)
3-7
–
CONTINUED
–
3