Subaru Impreza 2016, Руководство пользователя

Страница: 364 / 600

Black plate (372,1)
一 般
Model "A1250GE-A" EDITED: 2015/ 8/ 4
7-8
Starting and operating/Starting and stopping engine (models without push
–
button start system)
!
General precautions when starting
engine
WARNING
.
Never start the engine from out-
side the vehicle. It may result in
an accident.
.
Do not leave the engine running
in locations with poor ventilation,
such as a garage and indoors.
The exhaust gas may enter the
vehicle or indoors, and it may
result in carbon monoxide poi-
soning.
.
Do not start the engine near dry
foliage, paper, or other flam-
mable substances. The exhaust
pipe and exhaust emissions can
create a fire hazard at high
temperatures.
CAUTION
.
If the engine is stopped during
driving, the catalyst may over-
heat and burn.
.
When starting the engine, be sure
to sit in the driver
’
s seat.
NOTE
.
Avoid rapid racing and rapid accel-
eration immediately after the engine
has started.
.
For a short time after the engine has
started, the engine speed is kept high.
When the warm-up is completed, the
engine speed lowers automatically.
.
On rare occasions, it may be difficult
to start the engine depending on the
fuel and the usage condition (repeated
driving of a distance in which the
engine has not warmed up sufficiently).
In such a case, it is recommended that
you change to a different brand of fuel.
.
On rare occasions, transient knock-
ing may be heard from the engine when
the accelerator is operated rapidly
such as a rapid start-up and a rapid
acceleration. This is not a malfunction.
.
The engine starts more easily when
the headlights, air conditioner and rear
window defogger are turned off.
.
After the engine starts, the engine
speed will be kept high until the engine
has warmed up sufficiently.
!
MT petrol engine models
1. Apply the parking brake.
2. Turn off unnecessary lights and ac-
cessories.
3. Depress the clutch pedal to the floor
and shift the shift lever into neutral. Hold
the clutch pedal to the floor while starting
the engine.
4. Turn the ignition switch to the
“
ON
”
position and check the operation of the
warning and indicator lights. Refer to
“
Warning and indicator lights
” F
3-14.
5. Turn the ignition switch to the
“
START
”
position without depressing the accelera-
tor pedal. Release the key immediately
after the engine has started.
If the engine does not start, try the
following procedure.
(1) Turn the ignition switch to the
“
LOCK
”
position and wait for at least
10 seconds. After checking that the
parking brake is firmly set, turn the
ignition switch to the
“
START
”
position
while depressing the accelerator pedal
slightly (approximately a quarter of the
full stroke). Release the accelerator
pedal as soon as the engine starts.
(2) If this fails to start the engine, turn
the ignition switch back to the
“
LOCK
”
position and wait for at least 10
seconds. Then fully depress the accel-