Subaru Impreza 2016, Руководство пользователя

Страница: 368 / 600

Black plate (376,1)
一 般
Model "A1250GE-A" EDITED: 2015/ 8/ 4
7-12
Starting and operating/Starting and stopping engine (models with push
–
button start system)
not function depending on the radio
wave conditions around the vehicle. In
such a case, refer to
“
Starting engine
”
F
9-30.
.
If the vehicle battery is discharged,
the steering cannot be unlocked.
Charge the battery.
1) Operation indicator
2) Push-button ignition switch
When the push-button ignition switch is
pressed while depressing the clutch pedal
(MT models)/brake pedal (CVT models),
the engine will start. The start procedure
of the engine is as follows.
!
MT models
1. Carry the access key, and sit in the
driver
’
s seat.
2. Apply the parking brake.
3. Shift the shift lever in neutral.
4. Depress the brake pedal.
5. Depress the clutch pedal until the
indicator on the push-button ignition
switch turns green.
6. While depressing the clutch pedal,
press the push-button ignition switch.
NOTE
.
In case the engine does not start by
the normal engine start procedure,
move the shift lever to the neutral
position, and switch the power to
“
ACC
”
. Depress the clutch pedal, and
press the push-button ignition switch
for at least 15 seconds. The engine may
start. Only use this engine start proce-
dure in case of emergency.
.
For diesel engine models, the en-
gine will not start until the preheating
indicator light has turned off.
.
For diesel engine models, you may
feel vibration during engine idling for
several tens of seconds. This vibration
is caused by the self-learning proce-
dure of the injector. This learning
procedure is necessary for optimum
engine performance. This does not
indicate a malfunction.
!
CVT models
1. Carry the access key, and sit in the
driver
’
s seat.
2. Apply the parking brake.
3. Shift the select lever in the
“
P
”
posi-
tion. The engine can also start when the
select lever is in the
“
N
”
position, however,
for safety reasons, start in the
“
P
”
position.
4. Depress the brake pedal until the
operation indicator on the push-button
ignition switch turns green. When starting
with the select lever in the
“
N
”
position, the
indicator does not turn green.
5. While depressing the brake pedal,
press the push-button ignition switch.
NOTE
.
In case the engine does not start by
the normal engine start procedure,
move the select lever to the
“
P
”
posi-
tion, and switch the power to
“
ACC
”
.
Depress the brake pedal, and press the
push-button ignition switch for at least
15 seconds. The engine may start. Only
use this engine start procedure in case
of emergency.
.
When the engine is not started, the
brake pedal may feel stiff. In such a
case, depress the brake pedal more
forcefully than usual. Check that the
operation indicator on the push-button