Subaru 2004 LEGACY, Руководство по обслуживанию

Страница: 597 / 609

PS-78
POWER ASSISTED SYSTEM (POWER STEERING)
Oil Pump
10) Disassemble the oil pump and bracket by in-
serting a flat tip screwdriver as shown in the figure.
B: INSTALLATION
1) Install the oil pump to bracket.
(1) Place the oil pump bracket in a vise. Tighten
the bushing using a 12.7 mm (1/2
″
) type 14- and
21-mm box wrench until it contact with oil pump
mounting surface.
CAUTION:
When securing the oil pump bracket on a vice,
hold the oil pump bracket with the least possi-
ble force between two wood pieces.
(2) Tighten the bolt which holds the oil pump to
bracket.
Tightening torque:
15.7 N
⋅
m (1.6 kgf-m, 11.6 ft-lb)
Tightening torque:
37.3 N
⋅
m (3.8 kgf-m, 27.5 ft-lb)
2) Tighten the bolts which hold the power steering
pump bracket.
3) Interconnect the pressure hose and suction
hose.
Tightening torque:
Eye bolt
39 N
⋅
m (4.0 kgf-m, 28.9 ft-lb)
CAUTION:
If a hose is twisted at this step, take care the
hose may come into contact with some other
parts.
• Non-turbo model
(1) Bushing
(2) Nut
(3) 21 mm
(4) 14 mm
(5) Bolt
PS-00129
PS-00135
PS-00128
(1) Suction hose
(2) Pressure hose
PS-00137
PS-00188
(1)
PS-00460
(2)