Subaru 2004 LEGACY, Руководство по обслуживанию

Страница: 586 / 609

PS-67
POWER ASSISTED SYSTEM (POWER STEERING)
Pipe Assembly [LHD Model]
Tightening torque:
39 N
⋅
m (4.0 kgf-m, 28.9 ft-lb)
5) Temporarily connect the pressure hose and pipe
C, the return hose and D. Place the clamp E in the
position shown in the figure, and tighten the bolt
temporarily.
NOTE:
Ensure that the letter “8” on each clamp are diago-
nally opposite each other as shown in the figure.
6) Tighten the clamp E.
Tightening torque:
7.4 N
⋅
m (0.75 kgf-m, 5.4 ft-lb)
7) Tighten the pressure hose and pipe C, the return
hose and pipe D.
Tightening torque:
15 N
⋅
m (1.5 kgf-m, 10.8 ft-lb)
8) Connect the pipe A and B to the four pipe joints
of gearbox.
Tightening torque:
13 N
⋅
m (1.3 kgf-m, 9.4 ft-lb)
9) Install the front crossmember support plate and
jack-up plate.
10) Lower the vehicle.
11) Tighten the bolts which hold the hose bracket.
(1) Suction hose
(2) Pressure hose
(1) Return hose
(2) Pressure hose
(3) Approx. 18 mm (0.71 in)
(4) Clamp E
(5) Pipe C
(6) Pipe D
(1)
PS-00460
(2)
PS-00539
(4)
(3)
(2)
(6)
(5)
(1)
(1) Clamp E
(2) Pressure hose
(3) Return hose
(1) Pipe A
(2) Pipe B
PS-00540
(2)
(1)
(3)
(2)
PS-00553
(1)