STULZ Ultra-Series Humidifier Controller
40
(August,
2013)
BMS Comm
FACTORY
Sys Cfg
Factory
SYS CFG
Save Cfg
Control: 1
Service: 2
Sys Cfg
SAVE CFG
Humid
Save Parameters
No
Restore Parameters
To Customer:
No
To Factory:
No
Factory
Configuration
5.5.8
The Factory Configuration menu loop contains settings for
the options that should not need to be adjusted once the
system ships from the factory. When entered using the
Service Password, all parameters are read only and
cannot be changed. See Section 5.6 for details.
Sys
Configuration
5.5.9
The System Configuration menu loop contains
configuration screens to set up options selected at the time
of sale. When accessed using the Service password, the
parameters are read only and cannot be changed. Not all
options are available on a particular E-Ultra Controller.
Depending on the size of the controller, (small, medium or
large), some inputs and outputs are not available. See
Section 5.7 for details.
Save
Configuration
5.5.10
The next screen in the Service Menu after the System
Configuration review menu is the Service Level Save of
the configuration. Passwords may be changed and the
default set points may be restored and from this loop.
5.5.10.1 Set Passwords
This screen allows setting new passwords for entering the
Control and Service menus.
5.5.10.2 Customer Save
This screen allows the save of any adjustments made in
Service level menu screens as new "Customer"
parameters or restore the controller to the previously
saved "Customer" parameters. The user may also restore
the controller to the original "Factory" parameter values
shown in Table 1.
Use the Enter (
←
) key to move the flashing cursor to the
field to be confirmed and press the Up (
↑
) or Down (
↓
)
arrow key. The word "
No
" will momentarily change to "
Yes
"
indicating the command has been accepted. Then exit by
pressing the Enter (
↓
) key repeatedly until the flashing
cursor returns to the top left corner of the screen.
SERVICE MENU
software
SERVICE MENU
software
Set Passwords
SERVICE MENU
software
Customer Save
