Studer Xcom-SMS, Руководство пользователя

Страница: 36 / 48

Studer Innotec SA
Xcom-SMS
36 V 1.0.0 User manual
7.9.1 Writing parameters
Your system function with a number of parameters of which most are adjustable. This command
makes it possible to change (write) one or several of the system's parameters.
If you try to change a parameter which is not accessible with the Xcom-SMS, you will receive an
error message from the communication module Xcom-SMS (for example the parameter 5012).
In a system with several devices, changing a parameter is valid for all devices. A complete list of
parameters is available in the RCC-02/-03 Quick guide (pdf-file on the supplied SD card).
Format: param <num>=<value>(,<num>=<value>)
<num>
Parameter number (see the RCC-02/-03 Quick guide in .pdf available on the micro
SD card)
<value>
Assigning a value to a parameter, respecting its specific format.
The number of parameters <num>=<value> is limited to 10.
Example of "param" commands:
Command Functioning of the Xcom-SMS
param 1138=50 Limits the Xtender's battery charge current to 50 Adc.
param 1552=rapid, 1126=no Sets the kind of network loss detection (AC-In) to "rapid" and
prohibits Smart-boost on the Xtenders.
param 1142=1 Force a new battery cycle on the Xtenders.
Example of SMS changing
three parameters successfully.
Example of SMS changing three
parameters with error and the
corresponding reply.
In cases where the activation of a parameter will enable the execution of a
function on a device, the format is somewhat unusual. In the manuals, these
parameters don't have a possible value. (For example Xtender parameter 1142:
force a new cycle). In order to activate the parameter's function you have to write
"1" for this specific parameter.
123456 param 1138=50,
1552=rapid, 1126=no
Xcom-SMS P1138:ok,
P1552:ok, P1126:ok
123456 param 1138=50,
1552=rapide, 1126=n
Xcom-SMS P1138:ok,
P1552:ok, P1126:Error
(193): Invalid value