Studer Xcom-SMS, Руководство пользователя

Страница: 37 / 48

Studer Innotec SA
Xcom-SMS
User manual V 1.0.0 37
7.9.2 Reading parameters
This command makes it possible to receive (read) one or several parameter values of your system.
Format: param ? <num>(,<num>)
<num> At least 1, maxi 10
Parameter number (see the RCC-02/-03 Quick guide in .pdf available on the micro
SD card)
The maximum number of parameters <num> is limited to 10.
Example of "param" commands:
Command Functioning of the Xcom-SMS
param ? 1138 Indicates the Xtender's battery charge current limit
param ? 1552, 1126 Indicates the kind of network loss detection (AC-In) and the state of
the Smart-Boost.
7.10 A
CCESS TO THE SYSTEM
'
S USER INFORMATION BY
SMS
Your system constantly uses electrical quantities and diverse information for its operation which is
called "user information". With the Xcom-SMS you can access those at any time, for instance to
find out the current state of charge of your battery.
7.10.1 Reading user information
This command makes it possible to read one or several user information from the system.
Format: info ? <num>(,<num>)
<num> At least 1, maximum 10
Information number to read (see the RCC-02/-03 Quick guide in .pdf available on
the micro SD card)
Maximum number of <num> is limited to 10.
Example of "info" commands:
Command Functioning of the Xcom-SMS
info ? 3028 Reads the Xtender's operating mode
info ? 3000, 3005 Reads the Xtender's battery voltage and battery current.
Example of SMS reading two
parameters successfully.
123456 param ? 1138, 1552
Xcom-SMS P1138: Battery
charge current=50.0Adc,
P1552:Type of detection of
the grid loss (AC-In)=Rapid