Studer Xcom-SMS, Руководство пользователя

Страница: 17 / 48

Studer Innotec SA
Xcom-SMS
User manual V 1.0.0 17
(c) Micro SD card reader
The card reader allows for the insertion of a micro SD card to log data (chap. 11
– p. 42) or for system updates (chap. 12 – p. 43).
(d) CAN connectors
This connector allows to connect the Xcom-SMS with an Xtender system in order
to fully use its functions.
Figure 5.2: Back and isometric view of the Xcom-SMS
Key Description
(e) GSM antenna connector
This connector allows to connect the antenna to the module. The antenna
should be carefully tightened manually.
(f) Green signalisation LED for GSM communication
This LED indicates the state of communication with the telephone network. The
blinking codes are as follows:
1. LED off
- the modem is not in operation
2. Fast flashes
- searching for the network
- not yet registered at the network
- about to lose the network (feeble signal)
3. Slow blinking
- registered to the network, complete service
4. LED continuously lit
- ongoing call
(g) Micro SIM card connector
This is the connector to insert the micro SIM card that you will have to buy from
your telephone operator.