Studer Xcom-SMS, Руководство пользователя

Страница: 31 / 48

Studer Innotec SA
Xcom-SMS
User manual V 1.0.0 31
7.6.3 Sending events by number
Regardless of the event categories you have chosen to subscribe to it is possible to add or remove
specific events by number. You may choose to remove events that are not interesting to you
within a category, for instance within the error category even though you have chosen to receive
messages from this category.
Format: event <num>=<state>(,<num>=<state>)
<num> At least 1
Number of events affected by <state>
The quantity of event numbers are limited to 10.
<state>
At least 1
Indicates the state of an event, 2 possible values:
on:
event active
off: event deactivated
Example of command "event" for configuration by number:
Command Functioning of the Xcom-SMS
event 9=off,10=on,100=on,13=off If error numbers 9 or 13 occur on the system, no SMS will
be sent. An SMS will be sent if error 10 or 100 occur on the
system.
Example of SMS to configure
the sending of SMS based on
events numbers.
7.6.4 Receive the list of event subscribers
This command makes it possible to receive the list of event subscribers. It is thus possible to know
who receives which kind of event messages. This command is useful for the administrator of a
system to keep track of which users receive event information.
Format: event on ?
Example of SMS to configure
the sending of SMS for events
by category.
123456 event
9=off,10=on,100=on,13=off
Xcom-SMS
- cmd event: configuration
by num 9=off 10=on
100=on 13=off
123456 event
ntf=off,wrn=off,err=on,hlt=on
Xcom-SMS
- cmd event: configuration
by category ntf=off
wrn=off err=on hlt=on