Studer Xcom-SMS, Руководство пользователя

Страница: 16 / 48

Studer Innotec SA
Xcom-SMS
16 V 1.0.0 User manual
SD card inserted (high priority)
When a SD card is inserted the red and green signalisation LEDs blinks
simultaneously (orange) during 1.5 seconds and indicates that the card is
read/inserted correctly.
Update of the Xcom-SMS
During update of the Xcom-SMS (as soon as a micro SD card containing an
update has been inserted) the signalisation LED blinks red.
The updating process may take between 3 and 15 minutes. During this
period it is possible that the signalisation LED will stop for an instant. The
updating process is finalised as soon as the red signalisation LED stops
blinking for at least 20 seconds. Never interrupt an updating process.
Error detected during the update process or during data logging
If the Xcom-SMS detects an error, the red signalisation LED is continuously lit.
Micro SD card is full
If the Xcom-SMS detects that the micro SD card is full, the red signalisation LED
will flash.
Fatal errors of the Xcom-SMS
These errors will prevent the communication between the system and your
phone. The red signalisation LED will blink 2x repeatedly if the Xcom-SMS is facing
one of the following errors:
 The micro SD card is not configured
 The SIM card is not inserted
 The PIN code of the SIM card is wrong

The SIM card is locked. Use a mobile phone and the PUK code to unlock
the SIM card.
 Impossible to connect to the phone network.
In either case you will have to solve the problem (see chapter "Troubleshooting")
and then disconnect and reconnect the Xcom-SMS to its Xtender system
(disconnect and then reconnect the cable).
Occasional errors of the Xcom-SMS
The red signalisation LED blinks 2x once. These occasional errors are not serious
and will not prevent the use of the Xcom-SMS. For instance, the Xcom-SMS has
not been able to send an SMS.
Start-up of the Xcom-SMS
The signalisation LED blinks 2x repeatedly in orange (green and red LED lit
simultaneously) during the start-up of the system. During this period the Xcom-
SMS is not yet in operation.
In operation (low priority)
The green signalisation LED blinks 2x repeatedly if the Xcom-SMS is in operation
and none of the above states are present.