Studer Xcom-SMS, Руководство пользователя

Страница: 40 / 48

Studer Innotec SA
Xcom-SMS
40 V 1.0.0 User manual
3. Re-run the Xcom Configurator, making sure that the PIN code is that
of your new SIM card (see chapter 4.1).
4. Remove the micro SD card from your computer and insert it into your
Xcom-SMS module
5. Re-connect the Xcom-SMS to the Xtender system
6. Wait until the end of start-up (LED (b) blinks in green 2x repeatedly)
146 No SIM card
There is no SIM card inserted into the Xcom-SMS and the module has no
access to the GSM network.
You need to :
1. Insert a micro SD card into the Xcom-SMS
86 Incorrect PIN code
The PIN code that you entered in the Xcom Configurator while configuring
the micro SD card does not match the PIN code of the SIM card.
You need to :
1. Disconnect the module from the Xtender system
2. Remove the micro SD card from the module and insert into a
computer
3. Re-run the Xcom Configurator, making sure that the PIN code is that
of your new SIM card (see chapter 4.1)
4. Remove the micro SD card from your computer and insert it into your
Xcom-SMS module
5. Re-connect the Xcom-SMS to the Xtender system
6. Wait until the end of start-up (LED (b) blinks in green 2x repeatedly)
145 Blocked SIM card
Your SIM card is blocked due to too many attempts to access it with the
wrong PIN code.
You need to :
1. Disconnect the module from the Xtender system
2. Remove the micro SIM card from your Xcom-SMS, insert it into a
mobile phone and unblock it with the PUK code
3. Check the configuration of your micro SD card (see incorrect PIN
code of the SIM card here above) in order to make sure that it is the
correct PIN code that was used in the Xcom Configurator
4. Insert the SIM card (and the SD card) into the Xcom-SMS module
5. Re-connect the Xcom-SMS to the Xtender system
6. Wait until the end of start-up (LED (b) blinks in green 2x repeatedly)
88 Impossible to connect to the GSM network
Your Xcom-SMS module can't connect to the GSM network. In this case it will
tempt to connect indefinitely.