Studer VarioString VS-120, Руководство пользователя

Страница: 6 / 64

Studer Innotec SA
VarioString
6 V 2.3 User manual
2.2 I
MPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions. Read carefully the safety and operation
instructions before using the VarioString. Take into consideration all warnings mentioned both on the
equipment and in this manual, strictly following all instructions regarding its operation and use.
This user manual is intended to serve as a guideline for the safe and efficient use of the VarioString.
Anyone who installs or uses a VarioString can completely rely on this user manual and is bound to
observe all the safety instructions and indications here in.
The installation and commissioning of the VarioString must be entrusted to qualified personnel. The
installation and use must comply with the local safety instructions and standards in force in the
country.
2.3 C
ONVENTIONS
This symbol is used to indicate safety instructions which, if not followed, could result in serious
personal injury or death to the operator or the user.
This symbol is used to indicate a general danger for the user and/or a risk of material
damage and/or the cancellation of the guarantee.
This symbol is used to indicate a procedure or function that is important for a safe and
correct use of the equipment. Failure to respect these instructions may lead to the
cancellation of the guarantee or to a non-compliant installation.
This symbol placed on the product indicates that its surfaces may reach temperatures
higher than 60°C.
This symbol placed on the product indicates that its use must follow the instructions in the
user’s manual.
In general, values important for the operation of the equipment (for example: battery voltage during
absorption) are not mentioned and the parameter number is indicated in the following format:
{xxxxx}. The value of the parameter can be found in the table chap. 16.
In most cases, these values can be modified with the remote control RCC-02/03 (see chap. 10.1).
The parameter table available at the end of this manual (chapter 16) must be kept updated
in case the parameters are modified by the operator or the installer.
If an authorised person modifies a parameter not included in the list (advanced
parameters), the number of the modified parameter(s), the specifications of the
parameter(s) and the new value set are to be indicated at the end of the table.
All values that are not followed by a parameter number may not be modified.
All digits and letters in brackets or in square brackets in the text of this manual refer to items
represented in illustrations with a circle.