Studer VarioString VS-120 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 64

background image

Studer Innotec SA

VarioString

User manual

47

Functionalities of the RCC-02 and RCC-03 units are equivalent. They differ only in their external
aspect. The RCC-02 is designed for wall mounting whereas the RCC-03 is designed for board
mounting.

Model RCC-03 must be removed from the board to access the SD card slot (during updating, for
example).

Reference number Studer Innotec

Dimensions H x L x l [mm]

RCC-02

170 x 168 x 43.5

RCC-03

130 x 120 x 42.2

Both remote control models are supplied with a 2m cable.
Cables of specific lengths (5m, 20m and 50m) can be ordered.
Item reference: CAB-RJ45-8-xx. The length in metres is specified by xx.

It is possible to connect up to 2 RCC or Xcom to a single VarioString, and up to 3 RCC or Xcom to a
system with several VarioString or Xtender units.

The termination switch of the communication bus "Com. Bus" (9) remains in position T
(terminated) except when both connectors (8) are used. In this case and only in this case,
the switch must be placed in the O (open) position.

10.2

T

EMPERATURE SENSOR

BTS-01

The operating voltages for lead batteries vary depending on the temperature.
A temperature sensor is optionally available to correct the battery voltage
and guarantee an optimum charge for whatever battery temperature. The
correction factor given by the temperature sensor is set by parameter {14035}.

A single temperature sensor connected to one of the devices is enough in a
system containing several VarioString connected to the same battery bank
(multi-system).

Reference no. for the temperature sensor (including a 5m cable): BTS-01.
Dimensions: H x L x l / / 58 x 51.5 x 22mm.

10.2.1

Connecting the temperature sensor (BTS-01)

The optional temperature sensor BTS-01 is supplied with
a  5m  cable  fitted  with  RJ11/6-type  plugs.  It  may  be
connected or disconnected at any time (even when
the  device  is  operating)  using  the  corresponding
socket (7) marked “BTS & ARM02” on the VarioString.
Plug the connector into the socket (7) until it clicks in.
The  temperature  sensor  case  may  simply  be  stuck
onto the battery or directly next to it. The temperature
sensor is automatically recognised and the correction
of the voltage thresholds applied immediately. If a BSP
battery probe next to the battery is used, a BTS-01 is
not  necessary.  The  BSP  module  is  fitted  with  a
temperature sensor. If both elements (BTS-01 and BSP)
are present, only the BTS-01 is taken into account to
correct the battery temperature.

«
...
45
46
47
48
49
...
»

Содержание VarioString VS-120

































































Отзывы:

Нет отзывов

Похожие инструкции для VarioString VS-120

Бренд: Samson Страницы: 52

Бренд: Samson Страницы: 32

Бренд: Danfoss Страницы: 59

Бренд: Eaton Страницы: 2

Бренд: Eaton Страницы: 2

PowerXL DX-NET-ETHERCAT-2

Бренд: Eaton Страницы: 3

Бренд: Harmonic Drive Страницы: 25

Бренд: Nelson Страницы: 8

Бренд: Garmin Страницы: 220

Бренд: Gardena Страницы: 16

ROBO Cylinder RCP2 Series

Бренд: IAI Страницы: 5

Бренд: Mackie Страницы: 4

Бренд: Maclaren Страницы: 15

Бренд: Maclaren Страницы: 9

Бренд: Maclaren Страницы: 40

Бренд: Vacon Страницы: 50

Бренд: V2 Страницы: 116

Бренд: V2 Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды