Stryker S3 MEDSURG BED Скачать руководство пользователя страница 46

Страница: 46 / 79

3006-209-001 REV B

www.stryker.com

Operation

Arming or disarming Chaperone bed exit with zone control (option)

When armed,

Chaperone

bed exit monitors the patient’s position on the product.

Note:

A notification appears if there is not enough weight on the product to arm bed exit.

To arm bed exit:

Set the scale to zero. See

Setting the scale to zero on page 45

Note:

If you do not set the scale to zero before placing a patient on the product, bed exit may not operate properly.

Position the patient on the product.

Press and hold the

Arm/Disarm

button (D). See

Footboard control panel -

Chaperone

bed exit with zone control

(option) on page 41

Note:

Zone 1 illuminates as the default zone when you arm

Chaperone

bed exit.

To change the zone, press the

Zone

button (E). See

Footboard control panel -

Chaperone

bed exit with zone

control (option) on page 41

After arming

Chaperone

bed exit, the LED light bars on the footboard illuminate green, the bed exit indicator LED on the

footboard LED indicator illuminates, and the selected zone on the footboard control panel illuminates.

If the patient moves from the armed zone and changes the bed exit parameter:
•

LED light bars on the footboard flash amber

•

bed exit indicator LED on the footboard LED indicator flashes

•

sound alarm is triggered

•

selected zone on the footboard control panel flashes

•

status alert is displayed on the display screen

To disarm bed exit, press and hold the

Arm/Disarm

button again (D). See

Footboard control panel -

Chaperone

bed exit

with zone control (option) on page 41

Footboard LED indicators

F G H

Figure 26: Footboard LED indicators

Indicator

LED illuminates amber

Bed motion lock

Bed motion lock is activated or when the patient
control (Fowler, gatch, bed up/down) lock buttons
are activated

Fowler 30°+

Fowler 30°+ is locked. The LED will blink amber if:
•

Bed

Awareness system is on

•

Fowler 30°+ is being monitored and the Fowler
goes below 30 degrees

•

Fowler 30°+ is turned off

Содержание S3 MEDSURG BED
















































































Результаты поиска

Содержание S3 MEDSURG BED

Отзывы:

Stryker S3 MEDSURG BED, Руководство по эксплуатации, Страница: 46 / 79

Результаты поиска

Содержание S3 MEDSURG BED

Отзывы: