Stryker S3 MEDSURG BED, Руководство по эксплуатации, Страница: 54 / 79

50 3006-209-001 REV B www.stryker.com
Operation
Measuring weight gain or loss (Continued)
4. Release the Enter button.
Note: Do not touch the product when you measure weight gain or loss ( Figure 42 on page 50 ).
Figure 42: Do not touch bed
A confirmation notification indicates that enabling Gain/Loss was successful.
The base measurement is the initial patient weight registered when you enable Gain/Loss . The weight difference
between the base weight and the weight gained or lost is displayed on the bottom right hand corner ( Figure 43 on page
50 ).
Figure 43: Base and gain/loss weight measurement
Note: If the weight gained or lost exceeds 99.9 lb., Error –.- appears on the display ( Figure 44 on page 50 ).
Figure 44: Gain/loss error
To disable gain or loss:
1. Press the Menu button (A). See Figure 36 on page 47 .
2. Scroll to Gain/Loss .
3. Press and hold the Enter button (F). See Figure 36 on page 47 .
Changing equipment
Change equipment allows you to add or remove equipment or devices from the product without affecting the patient
weight.
To change equipment:
1. Press the Menu button (A). See Figure 36 on page 47 .