Stryker Power-PRO TL Cot, Руководство по эксплуатации

Страница: 26 / 798

F Fiig gu urre e 1 10 0 –– P Prre essss d do ow wn n o on n tth he e ffo oo ott p pe ed da all
L Lo oa ad diin ng g tth he e cco ott w wiitth h a a tta aiill lliifftt
Always load an occupied cot with a minimum of two trained operators. Two operators must be present when a cot is
occupied. Operators must be able to lift the total weight of the patient, cot, and any items on the cot.
W WA AR RN NIIN NG G
• Always make sure that the cot is not able to roll back off of the lift before you use the tail lift with a cot and patient. Make
sure that the lift gate stop is maintained and functioning.
• Always follow proper hand placement on hand grips. Keep all hands clear of the red safety bar pivots when you load or
unload the cot or change cot height position.
C CA AU UT TIIO ON N
• Always lower the cot to the lowest position to make sure that the cot connects to the cot fastener.
• Do not attempt to change the product height while the cot is connected to the cot fastener.
To load the cot:
1. Press the retract (-) button to move the cot to its lowest position for greater stability.
2. Push the cot forward onto the tail lift, head end first (Figure 11). Make sure that the wheels are in the proper location on
the tail lift to allow the safety stop to rotate into place and prevent the cot from rolling backward.
3. Before you raise the tail lift, make sure that there is adequate distance between the cot and the rear of the ambulance.
Make sure that there is nothing hanging from the cot.
4. As one operator raises the tail lift, the second operator should maintain a firm grip on the cot frame to provide greater
stability.
5. Both operators should guide the cot into the vehicle patient compartment and into the vehicle cot fastener (not included)
(Figure 12).
EN 22 6550-309-005 Rev H.0