1900-009-001 REV B
1-29
En
gli
sh
Accessories
RETRACTING PROTECTIVE TOP OPERATIONS (FA64074-BIL)
1. To open the protective top from the left or right side of the stretcher, squeeze the two release knobs located on the
lower rail (see figure 18), lift the rail and fold the top toward the opposite side until the desired opening is reached.
2. To close the protective top, grasp the lower rail and lower it until it locks into position. Verify that both lower rail
spring plungers are properly engaged in the slot provided on the plastic structures.
WARNING
•
For the patient’s safety, ensure that both sides of the two lower rails are properly locked into position before leaving
the patient unattended.
•
To avoid injury to the hands and/or fingers, do not use the lateral arms to close the top. Always use the centre of
the lower rail.
CAUTION
Do not use the protective top as a push/pull device.
RETRACTING PROTECTIVE TOP CLEANING
The plastic membrane of the protective top may be clean daily with mild soaps or low concentrated ammonia based
cleaners like window cleaners.
Figure 18