Stromag KLB-ZM, Инструкция по монтажу

Страница: 87 / 96

Assembly of the
piston (construc-
tion with circlip) 1. Carefully remove dust, dirt, filings and other foreign
particles.
2. Prior to assembly, moisten sealing areas on the pis-
ton (2) and outer body (3), as well as the sealing
rings (9)/(10) with hydraulic fluid.
ATTENTION
Risk of damage due to jamming
The running surfaces can be damaged due to jamming
and external forces.
► Ensure that the components do not jam.
► Do not use force or a hammer.
3. Slide the piston (2) including the pressure
springs (7)/(8) carefully into the outer body (3).
Ensure that the sealing rings (9)/(10) are not dam-
aged.
4. Insert the disc (21) and push it against the spring
pressure up to the end stop.
5. Mount the circlip (22).
After assembly of the circlip, pressure on the
disc (21) can be released.
SKB-0431
2 8 7
3
21
22 10 9
Fig. 18
Assembly of the
piston (construc-
tion with cylinder
cover) 1. Carefully remove dust, dirt, filings and other foreign
particles.
2. Prior to assembly, moisten sealing areas on the pis-
ton (2) and outer body (3), as well as the sealing
rings (9)/(10) with hydraulic fluid.
ATTENTION
Risk of damage due to jamming
The running surfaces can be damaged due to jamming
and external forces.
► Ensure that the components do not jam.
► Do not use force or a hammer.
3. Slide the piston (2) including the pressure
springs (7)/(8) carefully into the outer body (3).
Ensure that the sealing rings (9)/(10) are not dam-
aged.
SKB-0411
3 10 4 11
7 8
2
9
Fig. 19
35
Mounting instructions Pressure-operated spring-actuated multi-disc brake KMB-ZM, KLB-ZM • No. 777-00001 D • 10/2017