Stratus ftServer 2510, Руководство по планировке объекта

Страница: 13 / 104

Site Planning for ftServer 2510, 4410, and 6210 Systems 1-1
Chapter 1
Site Planning for ftServer 2510, 4410,
and 6210 Systems
1-
For an overview of required information and tasks you need to perform to prepare a site
for ftServer 2510, 4410, and 6210 systems, see:

“Site Planning Overview” on page 1-1

“Site Planning for Fault-Tolerant Systems” on page 1-3

“Site Planning Checklist” on page 1-4

“System Documentation” on page 1-7

“Safety Notices” on page 1-11
Site Planning Overview
Site planning for fault-tolerant systems includes:

Purchasing an appropriate cabinet and monitor
If you do not purchase a monitor from Stratus, provide a monitor that meets the
system’s requirements.
N O T E S
1. A monitor, keyboard, and mouse are required to
install ftServer System Software (ftSSS).
2. After you install VMware ESX
™
and ftSSS, the
monitor’s VGA port is not fault-tolerant. Therefore,
plan to provide a management PC to which you can
connect the system over a serial connection.
If you do not purchase a cabinet from Stratus, provide a cabinet that meets the
system’s requirements.