Stratus ftServer 2510, Руководство по планировке объекта

Страница: 19 / 104

System Documentation
Site Planning for ftServer 2510, 4410, and 6210 Systems 1-7
N O T E
Make sure that all cords and cables are long enough to
reach between their respective components and
connectors. Route all cables out of the way of foot traffic.
Working with Other Groups
❏
Have you provided your facilities group and contractors with the sketch of how you
plan to arrange the system and copies of the following?

“AC Power and HVAC Service Requirements” on page 2-2

“Redundant Power Sources” on page 2-1

Tables 2-1 , 2-2 , and 2-3 , worksheets for determining AC power requirements

Tables 2-5 and 2-6 (if you are using PDUs) or Tables 2-7 and 2-8 (if you are not
using PDUs), worksheets for determining the number of external power outlets
required

Appendix B, “Electrical Circuit and Wiring Information”

Any notes you have about site planning
❏
Have you reviewed and discussed the requirements with the facilities personnel
and contractors to ensure that all site modifications are understood and
implemented?
If you have any questions about the number and types of components, contact your
Stratus account representative or distributor.
System Documentation
Table 1-2 lists the hardware documents for ftServer 2510, 4410, and 6210 systems,
and the tasks described in each document. Also see Table 1-3 (for Windows systems),
Table 1-4 (for Linux systems), or Table 1-5 (for VMware ESX systems).
Table 1-2. ftServer 2510, 4410, and 6210 System Documentation
Document Task
Stratus ActiveService Network
Configuration Guide
(R072)
Configure your system for support by the ASN
Stratus ftServer Systems: PCI Adapter
Guide
(R461)
Install, configure, replace, or troubleshoot PCI adapters