Stratus ftServer 2510, Руководство по планировке объекта

Страница: 37 / 104

Selecting a UPS Unit for ftServer Systems
Electrical Power Planning 2-9
Selecting a UPS Unit for ftServer Systems
Stratus does not sell or service UPS units. However, Stratus has qualified UPS models
for use with ftServer 2510, 4410, and 6210 systems.
Use Table 2-1 to determine the number of watts the A-side of your system requires and
use Table 2-9 , 2-10 , or 2-11 to select a UPS model.
N O T E S
1. Generally, system fault tolerance could be at risk if
you use a UPS with systems that run ftSSS for
VMware vSphere or ftSSS for the Linux Operating
System. These versions of ftSSS do not include the
logic to decide whether the operating system should
shut down in response to certain signals from the
UPS, and the UPS may unnecessarily shut down the
system.
If you have a situation that requires the use of a UPS
(for example, if you do not have two separate power
sources at the installation site), use the tables in this
section to select an appropriate UPS, do
not use UPS
signaling, and contact the CAC or your authorized
Stratus service representative for additional
assistance.
2. Site planning information for the UPS in this
document is of a general nature only. Do not rely
exclusively on the UPS information in this document.
Contact APC at http://www.apcc.com for detailed
UPS specifications, documentation, and ordering
information.
Table 2-9. APC Symmetra Models for PDUs or for Multiple Systems
Locale APC Symmetra Model
Nominal
Voltage AC Power
Output
North America SYH2K6RMT-P1, SYH4K6RMT-P1,
SYH6K6RMT-P1, SYA8K16RMP, or
SYA12K16RMP
With SYA8K16RMP and SYA12K16RMP, also
order AP7582, a rack PDU extender.
208V 120V or
208V
Japan SYH2K6RMJ-P1, SYH4K6RMJ-P1, or
SYH6K6RMJ-P1 200V 100V or
200V