©
Drechselbedarf Schulte
Translation of the Original Instruction Manual Version 1.0
- 5 -
Introduction
This handbook contains instructions for assembly, safety notices, general operating and
maintenance instructions and spare parts lists. The design and construction of the Stratos 230
are intended to enable you to work with the machine without problems for many years, if you
comply with the recommendations specified in this manual.
1. Basic health and safety notices
Serious injuries can be caused by non-compliance with the following rules and warnings as
well as with the safety notices specified in this operating manual and on the machine itself.
•
In the interest of your own safety. Read the operating instructions before starting the
assembly and before commissioning the machine.
Store these operating instructions in a safe place and pass them on if you hand over the wood
turning lathe to someone else.
•
Do not make technical changes. The machine has been designed for working exclusively
with wood.
Familiarize yourself with the applications and restrictions of the machine and associated risks. If the
machine is not used for its intended purpose, the vendor will not bear any direct or indirect warranty
claims. Furthermore, the vendor is not liable for injuries caused by the non-intended use of the
machine.
•
Get informed before the initial use of the machine.
If you are not familiar with the functions of a wood turning lathe, find competent help. We urgently
recommend an introduction to handling a wood turning lathe by an experienced person.
Drechselbedarf Schulte offers appropriate courses.
•
When young people are using the machine,
the relevant legal requirements of the respective
country must be complied with.
•
Physical suitability.
Users are best to be physically fit and be introduced to the use of a wood
turning lathe by a competent person prior to initial use. Handicapped persons may use the
machine only after previous consultation by a specialist and with auxiliary resources, if applicable.
•
Keep children and visitors away from the workplace.
Children and visitors must stay in a safe zone outside the working area. Make the working area child-
proof by locking the workshop and by disconnecting the supply line or making sure it can be isolated.
•
Wear suitable clothing.
There is a risk of injury from rotating parts. Wear tight-fitting clothing. Take off scarves,
rings, bracelets and other jewellery and garments that could get caught by the rotating
parts. Wear sturdy protective footwear and ensure the floor is non-slip. Wear headgear/a
hair net to protect long hair. Avoid wearing gloves which may be caught during the wood
turning process.
•
Use Personal Protective Equipment (PPE).
Hearing protection
: For extended periods on the wood turning lathe, wear hearing
protection. Different materials can generate increased noise levels during wood turning.
Содержание FU-230
Страница 1: ...FU 230 WOOD TURNING LATHE...
