STRATOS FU-230, Инструкция по эксплуатации

Страница: 14 / 46

©
Drechselbedarf Schulte - 14 - Translation of the Original Instruction Manual Version 1.0
Delivery contents
A Lathe bed (see Fig. 15) with headstock, tailstock, tool rest support with tool rest 350 mm (
1“stems).
B Stand (see Fig. 10).
C Live centre
D Spur centre 25 mm, MT2.
E Knock out bar.
F
Feet, height adjustable, 8 x 3/8“ x 50 mm (Fig. 12).
G
Bolts 8 x 3/8“ for fixing the lathe bed to the stands.
H Morse taper double-sided, MT2, for aligning the centres.
I Allen keys 3 and 4 mm.
J Face plate wrench to loosen the face plate from the spindle.
K Face plate 150 mm with M33 x 3.5 mm thread with 2 set screws 5 mm (Fig. 8).
L Tool holder for the rear of the lathe bed (Fig. 7).
M Control unit holder for the front of the lathe bed (Fig. 11).
N In the accessory set, there is a stainless-steel handle which has to be attached to the top of the motor
flange. It is used to loosen the Poly-V belt.
Fig. 6 Accessories
Fig. 8 Face plate with set screw
Fig. 7 Tool holder
K
L