©
Drechselbedarf Schulte
- 26 -
Translation of the Original Instruction Manual Version 1.0
Movable control unit and main switch
Main switch
Position the main switch to ZERO (0) to turn the machine off and
to ON (I) to turn it on (Fig. 47).
The
main switch
should be used only at the beginning and the
end of the wood turning work. General turning on and off takes
place via the movable control unit.
Fig. 47
Movable control unit
Position the movable control unit (Fig. 48) in an easy-to-reach place or on the designated holder.
•
The
red
button (0) is a combination button for
EMERGENCY
STOP
and OFF (0) during woodturning.
•
The
green
ON button (I) is used to turn on the lathe during
woodturning.
•
The toggle switch is for forward and reverse operation. It is
usually in the forward position. Reverse operation is rarely
used, e.g. during repeated sanding.
•
The potentiometer (pot) is used to regulate the speed. Turn
Fig. 48
it clockwise and the speed increases. Turn it counter clockwise and the speed decreases.
Warning!
•
Always position the movable control unit within reach on the lathe or in the
designated holder so you can activate the
EMERGENCY STOP
button (0)
at
any time
.
•
When working with chucks, face plates and other M33 tools, a stop rod must
be used during reverse operation.
Содержание FU-230
Страница 1: ...FU 230 WOOD TURNING LATHE...
