Stratasys Objet1000 Connex 2, Руководство пользователя, Страница: 93 / 174

DOC-06800 Rev. A
5–57
Objet1000 - Connex 2 User Guide
Displaying the
Cross Section
of Objects The Section feature enables you to view the interior of an object by “slicing”
it on any axis. You can then manipulate the object to inspect the interior
from different angles. This may be important for deciding on the type of
support necessary when producing the model (see “Choosing the Support
Strength” on page 5 55). Displaying an object’s cross section only affects
how the tray is displayed on the screen; it does not change the object itself.
To display a cross section of the tray:
1. From the Tools menu, select Section .
The Section dialog box opens.
Figure 5-77: Section dialog box
2. Select Enable Clipping .
3. Use the slider controls for the X , Y , and Z axes to cut the tray so that
you see the cross section you want.
Figure 5-78: Whole view Figure 5-79: Cross-section view, after
using the Z-slider
D R A F T
16 June 2013