Stratasys Objet1000 Connex 2, Руководство пользователя, Страница: 56 / 174

Using Objet Studio
5–20
DOC-06800 Rev. A
Objet Studio splits the object into an assembly of component parts, each
a separate
stl file (“shell”).
The object appears—on the build tray and in the model tree—as an
assembly of parts (“shells”). You can assign each part a different model
material (This is explained in “Model Material Settings” on page 20).
Figure 5-23: Object after being converted to an assembly of component parts
Model-Material
Settings
Before placing objects on the build tray in Objet Studio, you should pay
attention to the material selection settings on the
Tray Settings ribbon.
Figure 5-24: Material selection settings
•
By default, the material selection settings on the ribbon correspond to
the model cartridges loaded in the printer.
•
The materials displayed are basic model materials. These materials can
later be combined to create digital materials (see “Digital Materials” on
page 21).
•
The material displayed on the top (VeroWhite, in the figure above) is
considered the
primary model material (“Model 1”). It is assigned to
objects that do not have a material assignment when you place them on
the build tray. For example, since
stl files do not contain information
about the model material, Objet Studio assigns the primary model
material to them. Also, if you try to insert
objdf files whose assigned
materials are not recognized by your version of Objet Studio, you can
insert the file by substituting the primary model material for the
missing materials.
•
Select
Single Material
if you want to print using only one material—
both of the material drop down menus contain the same material. If
you decide to print with multiple materials, the material in the top
drop down menu remains assigned to the object until you select
another material.
•
If you insert an objdf file into an empty build tray, and the model
material assignment does not match the settings on the Tray Settings
ribbon, these settings are changed automatically. However, if there is an
D R A F T
16 June 2013