Stratasys Objet1000 Connex 2 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 174

Stratasys Objet1000 Connex 2 Скачать руководство пользователя страница 11

DOC-06800 Rev. A

1–3

Objet1000 - Connex 2 User Guide

Terms Used in This Guide

build tray

In Objet Studio:

The surface displayed on the screen that

represents the actual build tray in the printer.

In the printer:

The surface upon which models are produced.

cleaning fluid

Cleanser for flushing material feed tubes and the printing
block, used to completely remove Model and Support
material from the system before loading another type of
material in the printer and before long term shutdown. The
cleaning fluid is supplied in material cartridges.

client/user workstation

The workstation on which Objet software is installed, used
for preparing build trays for production on Objet printers.
(There is no limit to the number of client workstations in the
local network.)

Objet printer

The Objet 3D printer referred to in this guide.

Printer computer

The computer inside the Objet printer that operates it. (This is
sometimes referred to as the embedded computer.)

Printer interface

The GUI (graphical user interface) used for controlling the
Objet printer.

Printer software

Software running on the computer inside the Objet printer,
that controls all printer operations.

Digital Material

Combinations of model materials fabricated in the printer
from the two basic model materials installed.

Digital Material Mode

The printer mode used to print a job using two different
model materials. (This mode can also be used to eliminate the
need for performing the Material Replacement procedure
when printing with a single model material.)

host/server workstation

The workstation that interfaces directly with the Objet printer
and is typically positioned next to it.

Job Manager

The part of Objet Studio software that manages production
jobs before they are sent to the Objet printer.

mixed part

Models whose parts are printed using more than one model
material.

mixed tray

A build tray containing objects, each of which is designed to
be printed using a different model material.

Model material

Material used for building models.

Objet Studio

The software with which users prepare jobs for producing
models.

OBJDF (Objet Digital Format)

The extension of a file that contains information about the
geometry of an object

and

the materials required to print it.

objdf

files are created in Objet Studio.

D R A F T
16 June 2013

«
...
9
10
11
12
13
...
»

Содержание Objet1000 Connex 2















































































































































































Отзывы:

Нет отзывов