Stratasys Objet1000 Connex 2, Руководство пользователя, Страница: 81 / 174

DOC-06800 Rev. A
5–45
Objet1000 - Connex 2 User Guide
To use polygon reduction:
1. From the Tools menu, select
Options
.
or—
In the Objet Studio Commands Menu, click Options .
2. In the Options dialog box, display the
Display
tab.
Figure 5-64: Options dialog box, Display tab
3. Select Enable Polygon Reduction .
4. Select Polygon Reduction (Percent) .
5. Enter the percentage of total polygons to display.
When you click
Apply
, the display changes.
Note: The setting affects the static display (when the object is not being
moved).
6. Set display options when the object is being moved ( Display while
changing view ):
•
Bounding Box— A box representing the object’s maximum
dimensions is displayed.
•
Adaptive Polygon Reduction— Varying degrees of polygon reduction
are applied, as necessary.
•
Entire Object— No polygon reduction is applied.
7. To save these settings, so that they will be applied every time you place
this object on the build tray, click
Save Polygon Reduction Data
.
8. Click Apply to see the results of the settings without closing the dialog
box.
Selecting the Entire Object option cancels polygon reduction.
D R A F T
16 June 2013