62
Appendix 2: FAQ
Appendix 2: Frequently Asked Questions
1. The receiver is set in static mode but it does not save data even if more than three satellites
are locked. The three red lights are blinking.
Solution: the internal memory of receiver is full, please delete some files.
2. The external and built-in power lights are blinking and I do not succeed in receiving
differential corrections.
Solution: The code license is expired, please contact STONEX
®
for a new code.
3. I do not succeed in connecting handheld and receiver by Bluetooth.
Solution: your receiver has a different working mode with respect to the menu of the controller,
please switch mode. If the problem persists, please contact STONEX
®
.
4. The receiver is set in rover mode and GPRS/GSM data link, the SIM card is placed in its slot
under the battery. However I do not succeed in reading the SIM card.
Solution: Every SIM has its PIN number, it must be disable. Moreover check on a cell-phone that
there is enough money on SIM for connecting to the internet.
5. The base is transmitting a radio signal, the rover is set in rover mode and built-in radio data
link, but data link light is turned off and rover doesn’t receiver correction: probably the radio
channel is wrong, use than handheld to select the correct radio channel on the rover.
