Chapter II: S9 III mainframe
18
Fig. 2.20 - S9III, all led blinking at the same time (wrong picture)
-
Now every time you press F key, the RECORD/ROVER/BASE lights will be on in the
corresponding order. You can select three different red lights, each of them refers to one
working mode.
-
Press I key when the chosen light is blinking and the receiver will start the selected
working mode .
Summary of working modes:
1.
Static mode
2.
Rover mode
3.
Base mode
Fig. 2.21 - S9III summary of working mode led
How can you select data link?
After you have entered working mode, press F key, the UHF/GPRS/EXT lights will blink by
turns. Then you can select different green lights, each one refers to different data link. This
situation refers only to the rover and base mode, since in static mode there is no green light
blinking.
1
2
3
