Chapter II: S9 III mainframe
13
signal it will start to blink every 30 seconds for a number of times equal to the number
of locked satellites.
Fig. 2.11 - S9III satellite led
STATIC led (
red
):
It switch on if the static mode is selected and it starts to blinks when the receiver is
recording data, with the same frequency of the sample rate.
Fig. 2.12 - S9III static led
ROVER led (
red
):
Rover led is on when the receiver is working in rover mode.
Fig. 2.13 - S9III rover led
BASE led(
red
):
Base led is on when the receiver is working in base mode.
