StoneAge CB-NAV, Руководство пользователя

Страница: 30 / 44

30
866-795-1586 • WWW.STONEAGETOOLS.COM
PARTS DIAGRAM
NAVIGATOR (NAV 130)
DRUM FRAME ASSEMBLY SHEET 1
( CONTINUED ON NEXT PAGE )
NOTE:
1. SWIVEL, FLANGE, DRUM, ELBOW & LOCKING PLATE INSTALLATION:
a) SECURE SWIVEL WITHIN CLAMPS AT LOCATION SHOWN IN TOP VIEW.
b) SLIDE ADAPTER FLANGE FULLY ONTO SWIVEL SHAFT (PROFILED SIDE TOWARD
SWIVEL), ALIGN SCREW WITH FLAT ON SWIVEL SHAFT AS NOTED, THEN TIGHTEN BOTH
SCREWS SECURELY (USE BLUE GOOP).
c) PLACE DRUM ON ADAPTER FLANGE (5 OF THE 6 HOLES WILL BE USED) AND ATTACH
WITH ALL 5 SCREWS (USE BLUE LOCTITE).
d) SECURELY TIGHTEN ELBOW ONTO SWIVEL (USE BLUE GOOP).
e) PLACE FLAT SIDE OF LOCKING PLATE UP AGAINST ONE OF THE SIDES OF
ELBOW. DETERMINE THE BEST SIDE AND ORIENTATION OF PLATE BY ASSURING
2 SCREWS CAN SECURE THE PLATE. REMOVE THOSE 2 SCREWS, PLACE PLATE FIRMLY
AGAINST THE SIDE OF THE ELBOW, ADD FLAT WASHERS AND REINSTALL SCREWS.2. 4x
RED LOCTITE: PN: 262 OR EQUIVALENT
2. BLUE GOOP IS A SWAGELOK BRAND ANTI-SEIZE. AN EQUIVALENT ALTERNATIVE IS
ACCEPTABLE.
3. APPLY BLUE LOCTITE: PN: 242 OR EQUIVALENT, TO ALL THREADED FASTENERS.
4. CLEAN AREA WHERE STICKER IS TO BE APPLIED WITH ISOPROPYL ALCOHOL. ATTACH
STICKER APPROXIMATELY WHERE SHOWN.
5. ATTACH PLATE TO COVER WITH 2 CENTER RIVETS THROUGH EXISTING HOLES IN COVER.
THEN BEND EACH END OF THE PLATE OVER THE COVER TO LOCATE WHERE THE OTHER
4 RIVETS WILL GO. MARK THE 4 LOCATIONS, DRILL <MOD-DIAM>.136 HOLES THROUGH
FIBERGLASS COVER. SECURE THE CORNERS OF THE PLATE WITH THE 4 REMAINING RIVETS.
# PART NUMBER QTY
1 HCS 103 DRUM ADAPTER FLANGE 1
2 HCS 105 KMP9 ELBOW 1
3 HCS 120 ELBOW LOCKING PLATE 1
4 NAV 102 BRANDING PLATE 1
5 NAV 131 DRUM FRAME, WELDMENT 1
6 NAV 132 SWIVEL MOUNT, WELDMENT 1
7 NAV 133 DRUM, 19” DIA 1
8 NAV 134 HOSE CONNECTION TUBE 1
9 NAV 135 DRUM COVER 1
10 NAV 302 NUT, LOCKING, FLANGED 2
11 NAV 312 TRACTION TAPE, 1” WIDE 1
12 NAV 322 STICKER, ARROW, LEFT 1
13 SG-MP12K-62-90 SWIVEL 1
14 AF 063-MP12 ADAPTER, 3/4 MP MALE X 1 TYPE M MALE 1
15 AF 070-MP9 GLAND, 9/16 MEDIUM PRESSURE 1
16 AF 071-MP9 COLLAR, 9/16 MEDIUM PRESSURE 1
17 CB 747 BLIND RIVET, ALUM, 1/8” DIA X .25 6
18 GS 325-05 SCREW, SHC, STAINLESS, 1|4-20 UNC X 1.250L 2
19 GSB 331-03 SCREW, BHSC, 5|16-18 UNC X 0.750L 11
20 GSB 337-04 SCREW, BHSC, 3|8-16 UNC X 1.000L 4
21 GSSH 0500-0375-SS SCREW, SHOULDER, 0.500 DIA x 0.375 LENGTH 2
22 GW 325-L-HC WASHER, LOCK, HIGH-COLLAR, 1/4”, STAINLESS 1
23 GW 331-F WASHER, FLAT, 5/16”, STAINLESS 8
24 GW 337-L WASHER, LOCK, 3/8”, STAINLESS 4
25 PL 160 WARNING PINCH POINT 1.5X3 DECAL