StoneAge CB-NAV, Руководство пользователя

Страница: 18 / 44

18
866-795-1586 • WWW.STONEAGETOOLS.COM
FIGURE 3
3. Release the Adjustable Handle on the BOP 070 Hinge Clamp to access the 4 socket head cap screws. Locate the side of the BOP
030 Collet Block Assembly with 4 threaded holes. Orient the Hinge Clamp so that the hinge is on the right. Fasten the Hinge Clamp
Assembly to the Collet Block Assembly using the 4 supplied socket head cap screws.
(Figure 3)
4. Insert the BOP 058 Female Positioner Assembly into the Hinge Clamp Assembly. This can be done in the open or closed position and
is designed to be adjustable based on the size of the pipe.
(Figure 4)
5. Close the Hinge Clamp Assembly and tighten the Adjustable Handle. To Install the BOP 012 OPTIONAL Splash Plate loosen the two
bolts on the collar, slide it onto the BOP 081-6 Snout Tube and hand tighten the collar bolts when in position.
(Figure 5)
STRAP MOUNT ASSEMBLY (BOP 050) - FEMALE POSITIONER SIDE
BOP 030 COLLET
BLOCK ASSEMBLY
BOP 058 FEMALE
POSTIONER
ASSEMBLY
SOCKET HEAD CAP
SCREWS (4)
BOP 070
HINGE CLAMP
ASSEMBLY
BOP 070
HINGE CLAMP
ASSEMBLY
COLLAR
COLLAR
BOLTS
ADJUSTABLE
HANDLE
FF-121-XXX
COLLET
FIGURE 4 FIGURE 5
ADJUSTABLE
HANDLE
*
OPTIONAL BOP 012
SPLASH PLATE
STRAP MOUNT ASSEMBLY SET-UP- OPTIONAL