StoneAge CB-NAV, Руководство пользователя

Страница: 23 / 44

23
866-795-1586 • WWW.STONEAGETOOLS.COM
CONTROL BOX SET-UP CONTROL BOX SET-UP
AIR SUPPLY AND LUBRICATOR SETTING
1. The CB-NAV Control Box is supplied with a twist claw style inlet coupling (Chicago style) located on the side of the FRL Assembly.
Connect a compatible compressed air line (not included) according to the Manufacturer’s instructions.
2. Using the pressure regulator on the FRL, adjust the operating pressure to 100 psi (0.7 MPa) for the application.
3. The CB-NAV Control Box is shipped with a minimum level of ISO Viscosity Grade 46 (SAE 20) air tool oil. The lubricator bowl will need to
be filled between the Minimum and Maximum lines with an equivalent air tool oil.
ADJUST INLINE
OILER TO FEED
1 DROP OF OIL
EVERY 30-60
SECONDS FOR
HIGH SPEED OR
CONTINUOUS
DUTY USAGE
PRESSURE
REGULATOR
AIR SHUT-
OFF VALVE
AIR SUPPLY FITTING
A universal AIR SUPPLY FITTING (Chicago style) is
located on the FRL. Connect a compatible compressed
air line (not included) according to the manufacturer’s
instructions.
PNEUMATIC DUMP CONTROL FITTING AND LINE
A DUMP CONTROL is located on the Control Box panel and can be set up to control an air actuated dump valve. To utilize the toggle, the
end user will need to install 1/4 in. (6.35 mm) O.D. flexible tubing (not included) between the DUMP CONTROL FITTING and the pneumatic
dump valve. (NOT INCLUDED)
REAR VIEW
DUMP CONTROL FITTING
INSTALL 1/4 IN. (6.35
MM) O.D. TUBING (NOT
INCLUDED) HERE
WARNING
Maximum operating pressure is 100 psi (0.7 MPa). Never exceed 140 psi (0.97 MPa) supply pressure. Exceeding 140 psi supply
pressure may result in injury to the Operator and/or damage to the equipment.