StoneAge CB-NAV, Руководство пользователя

Страница: 6 / 44

6
866-795-1586 • WWW.STONEAGETOOLS.COM
OPERATOR TRAINING
Managers, Supervisors, and Operators MUST be trained in Health
and Safety Awareness of High-pressure Water Jetting and hold a
copy of the Water Jetting Association (WJA) Code of Practice, or
equivalent (see
www.waterjetting.org.uk ).
Operators MUST be trained to identify and understand all applicable
standards for the equipment supplied. Operators should be trained
in manual handling techniques to prevent bodily injury.
Operators MUST read, understand, and follow the Operational and
Training Requirements (Section 7.0) of WJTA-IMCA’s Recommended
Practices For The Use Of High-pressure Waterjetting Equipment, or
equivalent.
Operators MUST read, understand and follow the Warnings,
Safety Information, Assembly, Installation, Connection, Operation,
Transport, Handling, Storage, and Maintenance Instructions detailed
in this manual.
StoneAge has designed and manufactured this equipment
considering all hazards associated with its operation. StoneAge
assessed these risks and incorporated safety features in the design.
StoneAge
WILL NOT accept responsibility for the results of misuse.
IT IS THE RESPONSIBILITY OF THE INSTALLER/OPERATOR
to conduct a job specific risk assessment prior to use. Job specific
risk assessment MUST be repeated for each different set up,
material, and location.
The risk assessment MUST conform to the Health and Safety at
Work Act 1974 and other relevant Health and Safety legislation.
The risk assessment MUST consider potential material or substance
hazards including:
•
Aerosols
•
Biological and microbiological (viral or bacterial) agents
•
Combustible materials
•
Dusts
•
Explosion
•
Fibers
•
Flammable substances
•
Fluids
•
Fumes
•
Gases
•
Mists
•
Oxidizing Agents
WARNING AND SAFETY INSTRUCTIONS
PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS
Use of Personal Protective Equipment (PPE) is dependent on
the working pressure of water and the cleaning application.
Managers, Supervisors, and Operators MUST carry out a job
specific risk assessment to define the exact requirements for PPE.
See Protective Equipment for Personnel (Section 6) of WJTA-
IMCA’s Recommended Practices For The Use Of High-pressure
Waterjetting Equipment for additional information.
Hygiene - Operators are advised to wash thoroughly after all
waterjetting operations to remove any waterblast residue which may
contain traces of harmful substances.
First aid provision - users MUST be provided with suitable first aid
facilities at the operation site.
PPE may include:
• Eye protection: Full face visor
• Foot protection: Kevlar
®
brand or steel toe capped,
waterproof, non-slip safety boots
• Hand protection: Waterproof gloves
• Ear protection: Ear protection for a minimum of 85 dBA
• Head protection: Hard hat that accepts a full face visor and
ear protection
• Body protection: Multi-layer waterproof clothing approved for
waterjetting
• Hose protection: Hose shroud
• Respiratory protection: May be required; refer to job specific
risk assessment
The NAVIGATOR NAV-100 has the potential to
cause serious injury if fingers, hair, or clothing
become caught between the drive rollers of
the drum assembly.
KEEP HANDS CLEAR
OF ROLLERS
The ABX-PRO Tractor has the potential to
cause serious injury if fingers, hair, or clothing
become caught between the hose rollers of
the ABX-PRO Tractor.
DO NOT OPERATE WITH THE HOUSING
DOORS OPEN. ENSURE THAT ALL FOUR
DOOR PINS ARE
SECURED PRIOR TO
OPERATION.
Maximum operating air pressure is 100
psi (0.7 MPa). Never exceed 125 psi (0.86
MPa) supply pressure. Exceeding 125 psi
(0.86 MPa) supply pressure may result in
injury to the Operator and/or damage to the
equipment
SAFETY LABEL DEFINITIONS
Replacement labels can be ordered through Stoneage
®
. See part diagrams for label locations and replace when necessary.