49
866-795-1586 • WWW.STONEAGETOOLS.COM
5. Slide the hose guide on the ABX-PRO Tractor into the Camlock on the Tripod Stand, with air fittings pointed down. Make sure to
engage the Camlock lever lock pins.
(Figure 3)
6. Feed the HP Hose through BOP 09-7 Snout.
(Figure 4)
7. Rotate the Cam Tension Lever counterclockwise on the ABX-PRO Tractor to the “Disengaged” position and feed the HP Male Hose
End through the ABX-PRO Tractor and attach the Female Camlock to the ABX-PRO Tractor hose guide.
(Figure 5)
8. Feed the HP Female Hose End through the Snout Receiver on the Weighted Splash Plate. Remove the Quick Pin from the Snout
Receiver, insert the Male Camlock and reinsert the Quick Pin.
(Figure 6)
ABX-PRO
TRACTOR
HOSE
GUIDE
TRIPOD
STAND
TRIPOD
STAND
HP HOSE
HP HOSE
MALE HOSE
END
HP HOSE WITH
MALE HOSE END
“DISENGAGE”
CAM TENSION
LEVER
MALE
CAMLOCK
MALE
CAMLOCK
WEIGHTED
SPLASH PLATE
SNOUT
RECEIVER
QUICK
PIN
FEMALE
CAMLOCK
FEMALE
CAMLOCK
FEMALE
CAMLOCK
BOP 09-7
SNOUT
FEMALE
HOSE END
FIGURE 3
FIGURE 5
FIGURE 6
FIGURE 4
PRO-700-V2 PRODRAIN SET-UP