manualshive.com logo in svg

StoneAge AUTOBOX ABX-PRO-100, Руководство пользователя, Страница: 44 / 60

Поделиться
Скачать
StoneAge AUTOBOX ABX-PRO-100 Скачать руководство пользователя страница 44

44

866-795-1586 • WWW.STONEAGETOOLS.COM

ABX-PRO TRACTOR ON FF-100 FIN FAN KIT SET-UP

2

1

3

4

NOTE:

Adjust position 
until the Guide 
Tubes are 
approximately 
1/2 in

. 

(13 mm) 

away from the 
tube sheet face. 

ATTACH ABX-PRO TRACTOR TO GUIDE ASSEMBLY AND FIN FAN

1.  Select an appropriate size Guide Tube from the chart located in the “Part Diagram” section of this manual. Install Guide Tube into 

the Collet Block on the Guide Assembly by loosening the 4 screws with a 1/4” Allen Wrench. Insert the Guide tube and tighten the 4 
screws on the Collet Block Cap.

2.  Using a 9/16 in. wrench, loosen all four rail clamp bolts located on the vertical carriage. Install the Guide Assembly into the rail clamps 

and adjust position until the Guide Tubes are approximately 1/2 in. (13 mm) away from the tube sheet face. Tighten the four rail clamp 
bolts.

3.  Loosen the 2 screws on the Collet Block with a 1/4” Allen Wrench and slide the Guide on the Tractor into the Collet Block Cap. Tighten 

the two screws on Collet Block Cap until secure.

4.  Rotate the pull rings on the BOP 048 Female Camlock to align with the notches on the ABX-PRO Tractor Guide. Slide the BOP 048 

Female Camlock onto the ABX-PRO Tractor Guide and secure in place.

Содержание AUTOBOX ABX-PRO-100





























































Отзывы:

Нет отзывов