18
866-795-1586 • WWW.STONEAGETOOLS.COM
HOSE AND COLLET INSTALLATION
3. Rotate the Cam Lever clockwise to the
“Engaged”
position to tighten the Idler Roller down onto the hose. There should be a
slow slip on the hose. If the slip is too tight or loose, move the Eccentric Lever off until a slow slip is obtained. Once the slip level is
achieved, push down on the Adjustable Handle to tighten the bushing assembly.
(Figure 3)
4. Push the back cover back into the closed position and secure the two Quick Release Pins on the top of the AUTOBOX
®
ABX-PRO
TRACTOR.
(Figure 4)
5. Attach the desired tool onto the male hose end (Stoneage
®
BT25 Beetle
®
shown for reference).
SEE THE APPLICABLE TOOL MANUAL
FOR SPECIFIC INSTALLATION INSTRUCTIONS.
FIGURE 3
FIGURE 4
FIGURE 5
QUICK RELEASE
PINS
TOOL
CAM
LEVER
ADJUSTABLE
HANDLE
“ENGAGED”
WARNING
Prior to use, always tighten and test the backout preventer to ensure the tool does not pass backward toward the Collet Block Assembly.
Failure to do so can result in severe injury and/or death. It is the responsibility of the user to select proper collet sizing to assure the end of
the hose will not pass through the collet.