Stocks AG Fan Jet Duo Plus VS-2 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 8 / 30

8
7.1 Emergency Stop instructions
In the case of an emergency always switch the main power switch to its upper (OFF) position
Then power down and isolate the power sup-
ply immediately by disconnecting the power
cable
7.2 Maintenance
WARNING
Always ensure the power supply is disconnected before any mainte-
nance work or cleaning of this machine.
Suitable protective clothing must be worn (See page 6)
DO NOT JET WASH THIS MACHINE
The machine must be checked regularly by the operator for any damage loose bolts or electrical connections,
vibrations, unusual sounds, and to ensure they function correctly.
Before use;
1 . Ensure the machine is securely mounted
2 . Check the power supply
3. Check the feed block assembly’s to ensure the feed rollers are clean and replace any worn feed rollers
4. Check the feed rollers rotate freely before starting work
Daily checks;
1. Check the disc to motor shaft socket screws (items 5 on page 22) on the lower side of the spinning disc
to ensure they are tight and the spinning disc turns with the motor
2 . Check the stainless disc vanes for any wear or distortion and replace prior to use if necessary.
Vane Kit available if required;- Part number FJ009C (set of vanes and fixings for one disc assembly)
3. Check the feed block assembly’s to ensure the feed rollers rotate freely
After each use;
1. Empty hopper before removing the feed block assembly and clean the machine thoroughly ensuring all
pellets residue has been cleaned from the hopper feed rollers and body of the machine.
2 . Store in dry conditions to protect the machine and control system from moisture
WARNING
Always observe all guidelines provided by the product
manufacturer with regards
to handling storage and disposal of products as some may be toxic !
Main Power
On-Off switch