Stocks AG Fan Jet Duo Plus VS-2 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 12 / 30

12
11 Optional Base Mounting Kit
Part No. FJ-005-TIP (available through your local dealer)
Machines are best mounted to our purpose built Central Beams or UTV kits but can also be mounted by using
these optional tipping base plate kits.
These have 4 holes in the base to take M12 bolts (see below) use these to attach to any support fabrication.
Th
e base plate can be repositioned to fit the holes in the back of the machine to attach to a vertical mounting
point – use whichever is best for you.
Ensure there is sufficient room to tip the hopper for emptying and ensure any potential trapping
points are noted taking care not to trap hands or fingers.
The tipping base plate is attached to the chassis by 2 bolts and spacers which act as the pivot, and a
removable steel pin secured by an ‘R’ clip
(as when fitting to the optional Central Beam or UTV kit)
There are 2 positions for the pin – use these to help level the Fan Jet.
The machine must be on level ground or flat surface before tipping the hopper to avoid the hopper
accidently tipping forward once the tipping pin has been removed.
To tip the hopper, remove the pin whilst supporting the hopper, lower gently when emptying the hopper.
PLEASE NOTE
Not required if fitting to
a Central Beam
(see page 10)
Supplied as part of the
UTV fitting kit
(see pages 10)