13
12.1 Electrical Components
12.2 Electrical Connections
The Fan Jet is supplied with a control panel and all wiring.
Ensure the power supply cable (
10
) is connected direct to the vehicle battery to ensure maximum power.
Connect the positive wire (fused) to the positive (+) terminal and negative earth connection to the negative (-)
terminal.
NOTE
Power requirement 12 volts with a minimum continuous 55amp supply.
WARNING
Failure to connect to the vehicle battery may result in control function problems and
possible damage to the vehicle battery and charging system must be in good condition to achieve the best
results.
All cables and controls are fitted with matching plugs and sockets. Extension cables available (please enquire)
WARNING
any modification to the wiring, fuse holder or controls will invalidate any warranty claim and
may affect the performance of the Fan Jet. Always replace any blown fuse with the same amp rated blade type
fuse as the original one fitted.
10
1
1.
Cab Control Panel
2.
Junction box (mount in central of mounting beam or fix to mounting plate B on the UTV frame)
3.
Left hand machine (ACW) disc motor and feed motor power cables
4.
Right hand machine (CW) disc motor and feed motor power cables
5.
Calibration switch and wiring loom
6.
Control cable connection
7.
Power cable connection
8.
GPS sensor connection
9.
6m control extension cable (not shown)
10.
5m fused power cable
11.
5m power cable extension (not shown)
NOTE Power and Control extension cables available
2
3
4
5
6
7
8
Содержание Fan Jet Duo Plus VS-2 130
Страница 23: ...23 22 Parts drawing...
Страница 30: ...30 29 Notes page...
