Stocks AG Fan Jet Duo Plus VS-2 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 11 / 30

11
10.1 Fitting to a vehicle or parent machine
Safe lifting practice to be observed when handling the machine as the net weight is over 25kg
Safety shoes and protective gloves to be worn when handling the machine
With a full hopper the 65L machine could weigh in excess of 80kg and the 130L machine 135kg and so ensure
the machine is securely attached to a suitably strong rigid mounting point.
We recommend front mounting direct to the chassis of self propelled sprayers or tractor front linkage, using the
bolt holes provided in a large vertical bracket of the Central Beam Assembly
NOTE many self propelled sprayer
manufacturers offer a suitable bracket or hydraulic raise and lower linkage for this purpose.
Locally fabricated mounting frames are not the responsibility of Stocks AG Ltd
If unsure seek advise from the parent machine manufacturer or supplier.
Ensure the disc height is a minimum of 1.5 metre above the crop canopy or the ground – more height may im-
prove the maximum spread width.
(minimum disc height of 2m required for 36m work)
10.2 Optional Central Beam Assembly
Central Beam; Part No. FJ-005-BEAM-600 (available through your local dealer)
10.3 Optional UTV Fitting Kit
UTV Fitting Kit; Part Number FJ-005-UTV2 (available through your local dealer)
Offering a sturdy fitting
option for most UTV fitments
with 4 hooked anchor points
with hand release fittings.
One piece tubular steel
construction with detachable
machine mounting plates.
Fixed fork lift point offers
safe and easy lifting on and
off of vehicle.
For more information
see page 28
Heavy duty tubular design offers a sturdy
support for the two hopper units when fitting
to the front of a SP sprayer or tractor.
Approx. dimensions of unit when assembled
65L machines (W) 960 x (H) 700 x (L) 1250
130L machines (W) 960 x (H) 700 x (L) 1350
Approx. weight 130 and 135kg
For more information
see page 26